- Need your info and help guys, im in a bit of a pickle
- 2003/2004 Mustang SVT Cobra Modification Database
- Nice facelift!!
- Predator and Spray
- Who should work on my car?
- I always wanted to get blown by twins.....
- should i see a huge increase?
- What is the best setting for QA1 Rear Drag shocks on a convertible?
- I'm back...........but still without my Cobra!
- Just ordered the 315 Nitto DR's .....!!!!!!!!
- Ok...whos gonna bye it
- My new intercooler reservoir for my 03 cobra
- Any info on the new snow boost cooler? I just read up an article in Mustang 5.0 Mag
- boost bump
- Plasma Booster results?
- SES light blinking
- Installed Tri Ax shifter... question.
- Nitto 315 Drag Radials INSTALLED!!!!! Amazing..
- Off Road Pipe
- Question about Bassani Exhaust Noise level
- SFPH extends Sale on all DUB Pulley Units w/Free Gatorback Belt
- What Clutch good for atleast 500rwhp?
- New Setup....
- Re-Dynoed Apten (Oval Port)
- Dom has been thinking rather seriously lately.
- Nice Numbers on this Cobra Motor...Are they right???
- cobra question...............
- Guys. 2.93 Upper with a 4lb Lower.. Doable without changing the stock Fuel/MAF Sys. ?
- question about timing on a KB cobra
- SFPH - Extends Sale on all DUB Regular & Non-Slip Pulley Units!
- Where can I buy dual focus pumps and for how much ??
- Awesome move to split up the Terminator section!
- 11 sec club............atco
- What size belt for 2.93 upper and 4# lower?
- Well Guys. The 4lb Lower plan fell through. But I GOT MY PRO-5.0 shifter installed.
- Anyone having a problem with the bumper melting near the tailpipes?
- LFP Heat Exchangers
- LFP Lower Pulley's
- Raced Tonight
- Dallas tuner
- Follow up on my VERY rich A/F chart
- Anyone datalog before and after IAT2 temps w/Apten blower?
- just thought about something
- apten is for sale
- For any 500+ RWHorsepower cobra application.. What MAF?
- If anyones is interested in any group purchases..
- Thinking about a pulley swap......
- Whats a good, safe size shot for our cars?
- Newbie here....SVTP.com veteran
- Copy of Throw Out Bearing TSB in PDF
- Parts piling up
- my car made 553hp-576tq SAE today!!!!!
- JLT intakes now avaliable at SVTSNAKE.com
- noises from my car
- Mystic Paint Question
- A few photos of my cars.
- Hey Guys.....
- Whats the next big thing for our cars?
- I'm not a cobra owner..............
- Cams
- Etown Cobra Event Oct. 15-17th
- JLT Group Purchase 10/11-10/24
- Updates on my "tick"
- Anyone Using an EGR Delete?
- Lucas Heavy Duty Oil Stabilizer
- New Intercooler Tank/Ice Box
- cog belt system
- Redline Water Wetter
- KB vs Apten Part II
- Wow the cold air can be dangerous
- Additives in the intercooler resovoir?
- posting up my dyno sheets???
- clutch cable question
- Shift Knob
- Alex- Stangreaks, Post Apten Dyno Charts, Weird
- Any real dyno/intake charge comparisons results with new HE?
- Long tubes
- Realized Something.
- Apten Oval Port vs. Triangular Port.
- The Infamous "Tick" TSB Article (pdf)
- My favorite terminator pics up to DATE.
- Which engine management with pulley & nitrous?
- Attention. The Mustang Magic "Snakebite" Cobra is for sale.
- Apten v. Amazon v. LFP Port
- nitto tires?
- I'm Back
- Any News From BG?
- Round 1 -- Florida heat vs my car and street tires
- U-Joint part# for solid axle swap?
- Thoughts about Solid Axle Rear suspension
- What's everyone's acutal weight?
- What Spark Plugs is everyone using?
- Is there a difference in the 03 and the 04 ECU's?
- Nice Intake Tube
- Gas Bib
- New Best Today
- Apten Oval Port, It may like 16+ lbs. of boost!
- Redline D4 Transmission Fluid caused hard shifting
- 03/04 Owners...Insurnace
- Crappy idle cold due to EGR
- no more nittos?
- midlength headers
- How does the Cobra fight detonation?
- I like these wheels
- What AFR's are everyone running?
- Will this setup rub?
- Need a suggestion for a gauge to compliment my wideband
- Got tuned today
- Need Suggestions - Shop May Have Overheated My Car
- Caster/Camber Plates
- sent my dynosheets to apten
- Nitrous guys: What AFR is nice and safe?
- FORD get it fixed this is poor!!
- Whipple?
- SFPH Extends DUB Pulley Unit Sale!
- Need opinions.
- 17" ET Streets on stock rims pic inside
- mustang magic tuesday
- Boost Gauge, Plasma Booster, and Clutch Quadrant Installed Today!
- The latest venomous john video is out!
- 75 Shot outing & Stock Clutch Massacre
- Testing to be done.....
- SFPH - Twin Screw Non-Slip Supercharger Pulleys on Sale!!!
- I Need Help!
- MM & Fast Fords Magazine Article
- What is this?
- kenne bell is finally on!!!!
- Kenne Bell vs. Whipple
- Are long tubes really worth it? Nitrous question.
- Important-- Anyone Thinking Of Doing Clutch Quadrant Install
- My 4# LOWER ARRIVED TODAY!
- Anyone have pics of H&R springs?
- Mid-Pipe help........
- a/f ratios
- STANG here!
- SFPQ DUB question!
- FRPP Billet Steel FW & Spec 3 Clutch
- What are the best diff bushings to go with?
- Catback w/ ProChamber question
- AF reading With and without cats??
- mustang magic dyno results
- Are Idlers Bling????
- My lightbar...like no other!
- Ever heard of an Apten w/2.75 not peg the maf?
- Low (1500 to 1900) RPM Surge/Misfire Finally Fixed!
- Got My O3 Sonic Pic Up! Click Car Show Link Below...
- Redline Water wetter + distilled water = drop in IAT2 temps
- 73.5" Belt with 2.76 and 1 idler??
- Apten 2.75 + 4lb Lower = Dirty
- Will I need the following after the Apten??
- got some new goodies goin in..
- MRT Classic Rolled Tips
- Aptens almost here.....
- TOB Retainer Help???
- SVT Snake.com Home Page Discussion: HP Twin Turbo Kit
- Come get some....PIMPJUICE!!!!!!!!!
- Apten is on!!!!!!!!!!!!!
- might order this!
- 1 more week of JLT GP 10% off all kits!
- New Best....
- Apten 1st impressions...
- ordered my tires
- another cold air question
- South Florida Pulley HQ has done it again!!
- Ran a new best at MSC V2.0
- Aftermarket Wideband questions
- pulley and chip in!
- does anyone know what the part # is for the hurst line lock???...........
- New Paint Job
- New ET W/ SRA, STOCK PULLEY....
- Group Purchase - SFPH Dial ur Boost Pulley System $129.95 Shipped
- Interesting New Vid....
- SFPH - S&B 10" Replacement Filters in STOCK!!!
- PICS of my KB motor coming OUT!!!!!
- need pics of black wheels on black terminator
- Which cylinder is which?
- 15k Hard miles, compression test results
- What will I need
- New Rotors
- 04 Cobra Price
- Computer MAF Compensation over 5.0 volts w/ MJ's Mafxtender?
- Put some of my new suspension in
- who has a line lock? ............
- battle of the power adders
- OE Ford Racing FR500s
- Does the EEC have to learn when chipped?
- Dyno Scheduled
- Photos of new Brushed SS MRT tips installed
- Jim Bell Vs. Dustin Whipple (Kenne Bell Vs. Whipple Supercharger Battle)
- Battery light coming on.
- MRT Catted H
- Subframe connectors
- Cut Springs
- Ice box testing Complete...
- APTEN OVAL port results.....:-) 500+rwhp memeber
- Oh so close to new best in 1/8th 7.25@99.98
- Kooks LT install question
- Apten+3.73s+DRs=No traction
- tire question?
- thoughts on my bfg's drag radials
- Lowes Speedway next saturday?
- wheel hop?
- whipple HP numbers
- Greetings everyone
- Big THANKS to all in on JLT GP!!
- Billet flow brace
- M/T drag radial
- Vibration from Dash
- Mystichrome Seat?
- Would it make sense to upgrade to the 26spline input shaft?
- Best place to buy Dyno jet Wide band?
- New Best
- What DIP setting on the MAFXtender for around 510rwhp?
- Toluene for octane booster
- Congrats to Sambandit ROTM
- My Bogart's got here
- Help Save The Svt
- 373's ??
- RWHP and ET Calculator
- Apten Oval Port w/ Upper-Lower Combo = I made the 500 CLUB!!!!
- SFPH - DUB Pulley Unit Sale - Free Gatorback Belt!
- Dyno'd my Mystic yesterday
- Raced a 568whp Procharged 02 Z06
- Quick question during JLT install...
- 03 cobra vs SS Camaro vs 300zx TT
- Hard tech question!
- New times with problems though........
- 649 hp 785 tq
- Dynojet Dyno Needed
- Which UPR quadrant?
- Swaping my lower pulley, need advice or a write up please.
- Detrimental Effects of High Boost on the Eaton Supercharger. (Long Discussion)
- ? about weird smell
- New LFP Cobra 3/8th's Hubcentric Wheel Spacers
- Will my stock belt work with a 2.76 and idlers?
- Another silly question
- I feel obligated to release this information!
- New NHRA Rules as of 01/05
- cooler tank
- Amazon ports
- Dyno Numbers
- Going wet
- What's next
- Can you tune w/ a KB Boost-A-Pump without the switch chip?
- SLP and my New 04
- What size belt for a 3.50 inch upper and 4# lower crank pulley on a KB or Whipple?
- Parts on the way...
- To Port or not to Port...
- Attn: Nitrous Guys....
- Where to buy a 92mm Pro-M Maf?